01
Kitchen Remodels
Per square foot of kitchen footprint
Full tear-out to finish with cabinet resets and counter templating.
View the tradePanel 01 / 08Austin, TexasScroll to read the shop
Renovation & small construction
Renovation and small construction, run out of one shop in Austin.
Six people, one truck, eleven years running out of a rented shop bay on the east side of town. We take on kitchen remodels, bathroom remodel work, flooring, drywall and paint, trim carpentry, framing for small additions, decks and fences, and the punch-list repairs nobody wants to schedule a whole contractor visit for.
- Shop line
- +1 (219) 555-7569
- Based at
- 179 Cedar Court, Austin, TX
Every job gets a written scope and a materials list before a wall comes down or a cabinet gets ordered. Not a text message. A page you keep.
[email protected]
Panel 02 / 08How the route runsDraws as you scroll
The route, walk-through to sign-off
Five stops, the same order on every job.
The line below is the actual sequence a Ronevexa job runs on, from the first walk-through to the sign-off walk. Nothing skips ahead of the written scope.
Fig. 02 — Job routeReduced motion shows the full line
- 01
Walk-through
We measure the room, note what's structural and what isn't, and flag anything that needs a licensed trade.
- 02
Written scope
A page with the work, the materials list and the price basis, before anything gets ordered.
- 03
Materials ordered
Cabinets, tile, decking or trim stock goes on order once the scope is signed, not before.
- 04
Work
Tear-out, framing, rough-in coordination with named trades, then finish work in the order the scope sets.
- 05
Sign-off
A walk of the finished job against the written scope, punch items closed before we call it done.
Route drawn on scrollReduced motion: line shown complete
This is the same route on a kitchen remodel, a fence job, or a half-day repair call. The stops don't move; only how long each one takes does.
Panel 03 / 08Scope of workOurs and not ours
What's ours, what isn't
We take on the trades we can do to code, and name the ones we can't.
A general contractor who subs out the whole job and marks it up twice isn't doing you a favor. We do the framing, drywall, trim, tile and finish work ourselves. Anything past that line goes to a licensed trade, named on the estimate.
On the estimate Ours, done in-house
- Kitchen and bathroom remodels, tear-out to finish
- LVP, engineered hardwood and hardwood refinishing
- Drywall patching, texture matching and two-coat paint
- Trim, casing, crown and built-ins cut on site
- Framing for small additions and decks, footings included
"We measure twice, cut once, and write it down before anyone touches drywall." That habit doesn't change by trade.
Named and subcontracted Not ours
- Electrical panel changes and new circuits
- Gas line work of any kind
- Structural changes without a stamped engineered plan
"We don't touch gas lines or main electrical panels. We bring in the trade licensed for it and put their name on the estimate." That line is on every scope where it applies, not a footnote.
Panel 04 / 08Eight trades, one shopFull index on work.html
The catalogue
Eight trades. Each one priced by its own basis, not a house rate.
Search for a kitchen remodel in Austin, a bathroom remodel cost estimate, flooring installation, a deck builder, or a handyman for punch-list repairs, and the same crew and the same written-scope habit shows up on every page below.
02
Bathroom Remodels
Per bathroom, in scope tiers
Waterproofing membrane under every tile job, no exceptions.
View the trade03
Flooring
Per square foot installed
LVP, engineered hardwood, and refinishing of existing hardwood.
View the trade04
Drywall & Painting
Per room
Patch-to-match texture with a two-coat paint minimum.
View the trade05
Carpentry & Trim
Per linear foot
Base, casing, crown and built-ins cut on site.
View the trade06
Additions & Framing
Per square foot of new or altered structure
Engineered stamped plans required before any wall comes down.
View the trade07
Decks & Fences
Per square foot for decks, per linear foot for fencing
Pressure-treated frame, composite or cedar decking, footings to local frost depth.
View the trade08
Repairs & Punch-List
Flat call-out plus itemized tasks
Half-day minimum call-out, itemized list, not hourly guesswork.
View the tradePanel 05 / 08Plate 04 — Framing jointRead like a drafted plate
The method, drafted
Read the joint the way we read it on site.
This is a real corner from a framing job, not a diagram. The callouts mark what an inspector checks and what we check before an inspector ever sees it.
Plate 04 — Framing corner jointScale N.T.S.
- A — Stud
Full dimensional stud, not a cut-down offcut
Corner studs carry load down to the plate. We check the grade stamp before it goes up, not after.
- B — Joist hanger
Rated hanger, nailed to spec, not toe-nailed
Every fastener hole on the hanger gets filled with the nail size the hanger is rated for.
- C — Shim gap
Shim gap checked with a level, not by eye
Gaps over an eighth of an inch get shimmed before drywall goes on, or the seam cracks within a year.
"If a wall comes down and it turns out to be load-bearing, work stops until there's an engineered plan, not a guess." That rule applies on every tear-out, not just the additions.
Panel 07 / 08In figuresEvery number traced elsewhere on this site
In figures
What eleven years on the same trucks adds up to.
These aren't marketing round numbers. Each one ties back to something stated plainly on this site.
| Years running the shop | 11Same crew base since founding |
|---|---|
| Crew | 6Working out of one shop bay, one truck |
| Standard call-out minimum | Half dayEvery punch-list call starts here, itemized |
| Workmanship guarantee | On every jobWhat's covered and what voids it: see the warranty terms |
Panel 08 / 08Get a scope startedInquiry only, no deposit taken here
Start here
Tell us the room and what's wrong with it.
A phone call gets you a walk-through date. This form gets a call back the same way. Either way, nothing gets ordered until there's a written scope you've seen.
179 Cedar Court, Werkstatt 2Austin, Texas 32418
+1 (219) 555-7569
[email protected]